show >>
Score: 0%
1. What is a signal?
An indication of what to expect The path of least resistance An electronic representation of sound Sound waves transported by cables
2. Most devices, except preamps and poweramps, are meant to work with ______________
Line Level Amplifiers Speakers Microphones
3. Output from a device should go to _______________ of the next device
Registry Input Bypass Output
4. Speakers are always _______________ in the signal chain
First Last Half-way Absent
5. A signal ____________________
Is lost in the mix Cannot be split or joined Has a will of its own Flows away from the origin and toward the destination/s
6. You have 5 mics. 2 for drums, 1 for bass, 1 for guitar and 1 for vocals. How many channels do you need?
5 3 3 mono plus 1 stereo 8
7. You have a 4 track tape recorder for the scenario in question 6. How would you best use the tracks?
Split the signal on track 1 Use only 1 mic on the drums Use the mid-side technique Leave it to the professionals
8. You have a reverb unit and a mixing desk with one effects send bus and one auxillary send bus. What is the best way to connect them?
Connect the left main output on the desk to the input on the effects unit Connect the pre-fader output of the desk to the input on the effects unit Connect the post-fader output of the desk to the input on the effects unit Connect the mic to the effects unit and connect the output of the effects unit to the input on the desk
9. What is the best explanation for a bus?
A signal path that any number of signals may travel on A route for the auxillary and effects sends to use A transport module with a designated position for each channel Bypass Universal Switch
10. Every channel on every mixing desk will have some form of:
Insert, fader and switch Faders, switches and LED's Gain, pan and EQ Mute, gain and delay
